How to close a hole in the wall?
|
|
The holes in the wall are done by chance during the repair of pipes or electrical systems, and also intentionally to hang any decorative items on the wall. There are several efficient ways to close small cracks, scratches or holes no more than 5 mm.
First method: Little holes
What do you need?
• Spatula (size that best matches your needs).
• Sandpaper.
• Paint in the color of the walls.
• Normal putty.
Depending on the size of the opening (for example, holes for nails or screws) you will have to use a more or less small spatula that can enter a grout with greater accuracy. As for putty, then there are a wide variety of species on the market, but we recommend buying such that does not shrinkage to avoid gaps between the putty and the rest of the wall.
When you were determined with a putty, a little product should be mixed with water, stir up to obtain a pasty mass, apply a little on the spatula and try to fill it as much as possible to them. The idea is to apply a putty with a spatula until the surface becomes as smooth as possible. When the hole is completely filled and the putty dry, grind it to smooth and compare it with the rest of the wall. As soon as it becomes smooth, put paint of the same color.
Second way: medium-sized holes and large holes
• Putty for seams.
• Patch or ribbon for drywall.
• Putty knife.
The mid-size hole is approximately the size of the golf ball. First you need to glue a patch or a piece of tape. In the case of patches, they are better adjacent to the wall and are specifically designed to close the mid-size holes, thus creating a surface that can be covered with putty and paint. Ribbons for drywall are cheaper and can be found in any construction store, but they leave a little more coarse and not such a smooth surface.
Climbing a hole with a ribbon for drywall or patch, make sure that the hole is completely closed. Then we put a putty on the piping on the wall so that it can be smoothed. If we use the ribbon, the procedure is the same. The remaining wrinkles will formulate the spatula and putty. We wait for a complete drying of the putty 24 hours and proceed to smooth the surface of the sandpaper, until it becomes smooth and homogeneous. Fully remove the dust before painting. https://pin-up-casino.info.tr/ |
|
|
|
